The Custom

The famous 80's circuit with more gain and full function tube buffered effects loop.

Controls 1 input, boost switch, volume, treble, middle, bass, presence and master volume.

Innovative features:
classic/modern switch
tube buffered effects loop
individual bias control for each power tube and meter pin jacks on back skirt.

Standard features:

Point to point wiring on G10 eyelet card
Chromate converted aluminum chassis
Custom made transformers
Quality components
Impedance selector switch for 4, 8, and 16 ohm cabs.

Effects Loop

The effects loop used in the Custom was designed by Kevin O'Conner of London Power fame.
It is a full function loop with 0db/-20db setting, series or paralle switch, send and return controls. This is the first loop that does not change the sound of the amplifier.
You can do the same test I use, plug a delay pedal in have some one play a chord on the guitar you pull both patch cables out at the same time your tone should not change. This is why befor I would not put loops into my amplifiers. This loop has been tweaked to my specs to work with the Custom amplifier.

Tubes:
4 12AX7s,
The power amp runs on 2 octal power tubes of choice, EL34, 6550, KT 66, KT 88, 6L6 for all the tonal variety you need.

We recommend a quality 4*12 speaker cab for that British sound!!!
Head only
Price $tba

Pic's soon!!